RSS Feed
Knowledgebase : Product
     
There are three methods for finding the IP address of an Art-Net product: * Connect using DMX-Workshop, this will display the product in a network list along with its IP address. DMX-Workshop can be downloaded from here [1]. * Ping: Open a comma...
The IP address of all Artistic Licence network products can be reset to factory default using the front panel controls as described below: PRODUCT IP RESET PROCEDURE AL5001 A AL5002 A Data-Lynx O/P B Data-Lynx I/...
It is sometimes necessary to add a new ballast to an existing installation. Usually you will want to do this without changing the short addresses of the existing ballasts. To do this you need to isolate the new ballast from the existing network prio...
Artistic Licence offers a number of products used to convert and manage DALI. The Rail-Dali-Dmx [1] converts DALI to DMX512 and the Rail-Dmx-Dali [2] converts to DMX to DALI. There is a very large speed difference between DMX512 and DALI which m...
DMX-Workshop is the free of charge Windows application for monitoring and configuring Art-Net devices. When used with Windows 7, certain additional steps are required to ensure it runs correctly. Specifically Windows XP and Administrator permission is req...
This application note [1] provides an overview of how to use DALI translate in Dmx-Workshop. DALI translate functionality allows the user to translate Art-Osc to physical DALI using the daliDongle and visa-versa. Links: ------ [1] http://www.artisticlice...
This application note [1] provides an overview of how to use the DALI transmit and sniffer functions in Dmx-Workshop. DALI output can be achieved with both the daliDongle and using Art-Osc. Links: ------ [1] http://www.artisticlicence.com/WebSiteMaster/A...
You'll find the import from CSV button in the Pixel Map tab. From here the process of importing a properly formatted CSV is straight forward. You just need to find and open your pre-existing CSV file. Please note that you must not have the file open in...
dVnet has the ability to operate as a network translator / soft-patch. This can be done using one or two network cards. The input protocol is always Art-Net and the output protocol can be selected between Art-Net, KiNet and sACN. This example descr...
From time to time, new firmware is released for Jump-Start. The latest versions can be found here [1]. It is not necessary to return Jump-Start for upgrade - it can be done in the field. This is achieved by connecting Jump-Start to an Artistic Licence ...
Jump-Start is a low cost tool used to remotely set the start address (and other parameters) of RDM fixtures. There is a quick guide to setting the start address here [1]. The full user guide is here in English [2] and Spanish [3]. Links: ------ ...
Most customers use Mic-Edit to create their own fixtures when required. However Artistic Licence does release occasional updates to the library. You can make requests using the following application form. Additionally, if you have created fixtures y...
All versions of moody (with a DMX512 port) output a total of 42 slots (or channels) of data. The first 40 slots are filled with colour information in either 3 slot footprints for RGB or 4 slot footprints for RGBW. For example, the largest moody - the "...
Users who are more familiar with DMX512 than DALI can find the way DALI ballasts respond to power cycle or fault conditions confusing. A key difference between DMX512 and DALI is that DMX512 is continuously refreshing whereas DALI is not. When A DMX...
RAIL-DALI-DMX. QUICK START. Often a customer simply wishes to use the Rail-DALI-DMX product to convert a simple DALI channel to DMX. The following instructions allow this: * Open the top cover to access the dip switches. * Set Switch-6 to off....
vSplit provides a very flexible solution to DMX distribution. The number of product configurations run to millions and so not every configuration is available from stock, but is built to order. The following guide is an over view of how to generate the...
Help Desk Software by Kayako Fusion