moody y1

Price: £129.00 We have 0 in stock.

1/2

Slideshow: « » | start / stop

Wall mount lighting controller

moody y1™ is a wall mounted DMX512 & DALI controller. It is designed to control a zone of RGBW, such as a coving feature.

All electronics are mounted on the rear of the product, so there is no need for cumbersome external control boxes. Both programming and operation are performed via a very simple user interface, so no additional programming kit is required.

The product is housed in a single gang UK wall panel and is supplied complete with a dry-line style back box which allows the product to be used internationally.

The user interface is a rotary control wheel which incorporates a push switch. The wheel is illuminated by a full colour LED which is used to feedback both intensity and colour to the user.

From a user perspective, the product echoes the operation of a conventional dimmer switch: rotate to control intensity, push to auto-fade on or off.

Product programming is achieved by holding down the push switch for 3 seconds. The user is then guided through selection of the selection of the hue and white level. A rear panel control allows programming to be inhibited; this is useful for preserving the original design intent in an application with many users (e.g. a hotel room).

The DMX512 output provides 4 channels to represent the 3 zones of RGBW.

The DALI output provides 4 groups to represent the 3 zones of RGBW.

The product can be powered from 9 to 24 VDC, so the LED power supply can also power moody.

See the moody selection guide for a comparison of features.

Are you looking for a higher specification?

moody y3, £129.00 - View » - Add to cart »

Wall panel controller for 3 zones of RGBW colour with DALI and DMX outputs.

 

moody y10, £129.00 - View » - Add to cart »

Wall panel controller for 10 zones of RGBW colour with DALI and DMX outputs.

 

Accessories

Rail-Pipe HC, £285.00 - View » - Add to cart »

Six Channel High Current Constant Voltage Controller for Passive LED Fixtures.