moody cvi1 retro
Please click on the images to open a larger view
Wall mount lighting controllermoody cvi1™ is a wall mounted controller with built-in CV dimmer. It is designed for intensity control over a single channel of light.
All electronics are mounted on the rear of the product, so there is no need for cumbersome external control boxes. Both programming and operation are performed via a very simple user interface, so no additional programming kit is required.
The standard moody product is supplied in a single-gang UK wall panel with a dry-line style back box, which allows the product to be used internationally. However, moody retro comprises just the dial and control electronics, so it can be slotted into existing wall plates. This is ideal for installations where the standard white panel would not match the existing decor or is not desired. moody retro offers all the control options of the standard moody range.
The user interface is a rotary control wheel which incorporates a push switch. The wheel is illuminated by an LED which is used to feedback intensity to the user.
From a user perspective, the product echoes the operation of a conventional dimmer switch: rotate to control intensity, push to auto-fade on or off.
The output is 12-24 VDC constant voltage dimming (5A total). The LED power supply is also used to power moody.
Retrofitting the dial
When using moody retro, you need to decide whether to use the translucent dial supplied with the product, or the dial supplied with the retrofit panel.
If the translucent dial is used, it should be fixed using a small amount of clear silicone.
If you choose to use the opaque dial supplied with the retrofit panel, the backlighting on the dial will not be noticeable. However, this approach often provides a better match with existing decor.
It should be noted that the shaft on moody retro is a 6mm diameter full circle with friction grooves. Many dials supplied by other manufacturers are designed to accept a 6mm shaft with a D shape (flat on one side). In this situation you will need to use a 6mm drill bit as a reamer, or use a sharp blade, to shape the D-profile into a 6mm diameter circular aperture.
See the moody selection guide for a comparison of features.
- Wall mount lighting controller
- For use with user-supplied panel
- CV dimming 12-24 VDC
- Grand master control
- Illuminated control wheel
- No external programming required
- Listing: CE
- IP Rating: Indoor use
- Power: 500mW plus LED load
- Input Voltage: 12 - 24 VDC
- LED Drive Current: 5A total
- Height: 45mm
- Width: 45mm
- Depth: 17mm (plus 18mm spindle)
- Mounting thread: 9mm
- LED output: Screw Terminal
- Power Connection: Screw Terminal
- Net Mass: 0.11 kg
- Approximate Carton Mass: 0.30 kg
- Approximate Carton Dimensions: 220 x 180 x 120 mm
- Volume: 4752000 mm³
- Manufacturer: Artistic Licence Engineering Ltd
- Country of Manufacture: The United Kingdom