moody x10

Price: £129.00 We have 8 in stock.

1/8

Slideshow: « » | start / stop

Wall mount lighting controller

moody x10™ is a wall mounted DMX512 & DALI controller. It is designed to control 10 RGB zones of colour, such as coving features.

All electronics are mounted on the rear of the product, so there is no need for cumbersome external control boxes. Both programming and operation are performed via a very simple user interface, so no additional programming kit is required.

The product is housed in a single gang UK wall panel and is supplied complete with a dry-line style back box which allows the product to be used internationally.

moody requires a cosmetic fascia plate which must be purchased separately. Artistic Licence resells the following 'Scolmore definity click' products: brushed steel (moody fascia bs), stainless steel (moody fascia ss), chrome (moody fascia ch), matt black with chrome dial (moody fascia bkch), matt black (moody fascia bk), polished white (moody fascia pw).

The user interface is a rotary control wheel which incorporates a push switch. The wheel is illuminated by a full colour LED which is used to feedback both master level and colour to the user. Please note that the illuminated dial feature is not supported with the matt black (moody fascia bk) and polished white (moody fascia pw) fascia plates.

From a user perspective, the product echoes the operation of a conventional dimmer switch: rotate to control intensity, push to auto-fade on or off.

Product programming is achieved by holding down the push switch for 3 seconds. The user is then guided through selection of the hue and saturation for each zone. A rear panel control allows programming to be inhibited; this is useful for preserving the original design intent in an application with many users (e.g. a hotel room).

The DMX512 output provides 30 channels to represent the 10 zones of RGB.

The DALI output provides 30 consecutive short addresses to represent the 10 zones of RGB.

The product can be powered from 9 to 24 VDC, so the LED power supply can also power moody. Alternatively you can order one here PSU-24-2-FER.


Customers wishing to use the DALI output should ensure that their installation has a DALI bus power supply fitted. If not, you can order one here Rail-PSU-D4.

Are you looking for a less powerful solution?

moody x1, £129.00 - View » - Add to cart »

Wall panel controller for a zone of RGB colour with DALI and DMX outputs.

 

moody x3, £129.00 - View » - Add to cart »

Wall panel controller for 3 zones of RGB colour with DALI and DMX outputs.

 

Accessories

Rail-Pipe HC, £285.00 - View » - Add to cart »

Six Channel High Current Constant Voltage Controller for Passive LED Fixtures.

 

Customers who purchased moody x10 also purchased:

moody fascia black - black, £15.00 - View » - Add to cart »

Cover and dial kit for moody. Matt black plastic fascia plate and dial.

 

moody fascia black - chrome, £15.00 - View » - Add to cart »

Cover and dial kit for moody. Matt black plastic fascia plate and chrome dial.

 

moody fascia brushed - brushed, £15.00 - View » - Add to cart »

Cover and dial kit for moody. Brushed steel fascia plate and brushed steel dial.

 

moody fascia chrome - chrome, £15.00 - View » - Add to cart »

Cover and dial kit for moody. Chrome fascia plate and chrome dial.

 

moody fascia white - white, £15.00 - View » - Add to cart »

Cover and dial kit for moody. Polished white fascia plate and polished white dial.

 

moody fascia stainless - stainless, £15.00 - View » - Add to cart »

Cover and dial kit for moody. Stainless steel fascia plate and stainless steel dial.