Wall mount lighting controllermoody y3™ is a wall mounted DMX512 & DALI controller. It is designed to control 3 zones of RGBW, such as coving features.
All electronics are mounted on the rear of the product, so there is no need for cumbersome external control boxes. Both programming and operation are performed via a very simple user interface, so no additional programming kit is required.
The product is housed in a single gang UK wall panel and is supplied complete with a dry-line style back box which allows the product to be used internationally.
moody requires a cosmetic fascia plate which must be purchased separately. Artistic Licence resells the following 'Scolmore definity click' products: brushed steel (moody fascia bs), stainless steel (moody fascia ss), chrome (moody fascia ch), matt black with chrome dial (moody fascia bkch), matt black (moody fascia bk), polished white (moody fascia pw).
The user interface is a rotary control wheel which incorporates a push switch. The wheel is illuminated by a full colour LED which is used to feedback both master level and colour to the user. Please note that the illuminated dial feature is not supported with the matt black (moody fascia bk) and polished white (moody fascia pw) fascia plates.
From a user perspective, the product echoes the operation of a conventional dimmer switch: rotate to control intensity, push to auto-fade on or off.
Product programming is achieved by holding down the push switch for 3 seconds. The user is then guided through selection of the selection of the hue and white level for each zone. A rear panel control allows programming to be inhibited; this is useful for preserving the original design intent in an application with many users (e.g. a hotel room).
The DMX512 output provides 12 channels to represent the 3 zones of RGBW.
The DALI output provides 12 groups to represent the 3 zones of RGBW.
The product can be powered from 9 to 24 VDC, so the LED power supply can also power moody. Alternatively you can order one here PSU-24-2-FER.
Customers wishing to use the DALI output should ensure that their installation has a DALI bus power supply fitted. If not, you can order one here Rail-PSU-D4.
- UK panel mount
- Wall mount DMX512 & DALI controller
- DMX512 and DALI output
- Control 3 zones of RGBW
- Grand master control
- Full RGB Illuminated control wheel
- No external programming required
- Dry-line back box supplied
- Listing: CE
- IP Rating: Indoor use
- Power: 500mW
- Input Voltage: 9 - 24 VDC
- Height: 86mm
- Width: 86mm
- Depth: 15.2mm behind mounting surface
- Mounting screw centres: 60.6mm
- DMX512 output: Screw Terminal
- DALI: Screw Terminal
- Power Connection: Screw Terminal
- Net Mass: 0.11 kg
- Approximate Carton Mass: 0.30 kg
- Approximate Carton Dimensions: 220 x 180 x 120 mm
- Volume: 4752000 mm³
- Manufacturer: Artistic Licence Engineering Ltd
- Country of Manufacture: The United Kingdom